Command Line
check ont status
show gpon onu state gpon-olt_1/2/3
Check ONT power
show pon power attenuation gpon-onu_1/2/3:18
Check power interface
show interface optical-module-info gpon-olt_1/1/1
check oNT mac address
show mac gpon onu gpon-onu_1/2/3:18
check oNT uptime and oNT history logs
show gpon onu detail-info gpon-onu_1/2/3:18
find oNT by SN number
show gpon onu by sn ZTEGC123456F
check oNT version
show gpon remote-onu equip gpon-onu_1/2/3:18
check OLT uptime
show system-group
check oLT board
show card
check OLT prosessor and memory
show processor
check olt card temperature
show card-temperature
Cek Detail Config di Interface ke arah ONT
show run interface gpon-onu_1/2/5:4
Cek Status Interface ONT
show gpon onu state gpon-olt_1/2/5 4
Cek Nilai Optik ONT
show pon power attenuation gpon-onu_1/2/5:4
Cek Utilisasi Bandwith Link ONT Real Time
show interface gpon-onu_1/2/5:4
Cek ONT Uptime dan History:
show gpon onu detail-info gpon-onu_1/1/16:1
Cek Mac Address Perangkat yang terkoneksi ke ONT
show mac gpon onu gpon-onu_1/1/16:1
Cek ONT Version
show gpon remote-onu equip gpon-onu_1/1/16:1
Cek Status Port di ONT
show gpon remote-onu interface eth gpon-onu_1/1/16:1
Reboot/Restart ONT
config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/1/16:1
(gpon-onu-mng)#reboot
Shutdown Port 1 di ONT
config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/1/16:1
(gpon-onu-mng)#interface eth eth_0/1 state lock
Cek Konfigurasi PON ONU
show onu running config gpon-onu_1/1/16:1
Check OLT Uptime
show system-group
Check OLT Board
show card
Check OLT Processor dan Memory
show processor
Check OLT Temperature
show temperature
Checking OLT Per Slot
show card slotno 12
Finding ONT By SN Number
sho gpon onu by sn ALCLB1C7DA30
Checking ONT IP (ROUTING MODE)
In This case, We used ip-host 1 in one ONT we can create 4 IP-HOST management
show gpon remote-onu ip-host gpon-onu_1/1/16:1
Reset factory ONT
OLT-ZTE_C320#config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#restore factory
HOW TO LOCK / SHUTDOWN THIRD PORT ONT
config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#interface eth eth_0/3 state lock
HOW TO UNLOCK PORT ONT
config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#interface eth eth_0/3 state unlock
HOW TO RELEASE RENEW ONT AS DHCP CLIENT
config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
RESET SLOT
reset-card slotno 12
SWAP
Use This for First Level Handling when you get Anomaly Process. sometimes it can help you, but sometime isn’t.
swap
CHECKING VLAN SUMMARY